A client's hands holding a camel leather sample against the shelved material library
The material library

Frames, foam, fabric and leather: what goes into a custom sofa.

Samples you can lift, bend, fold and take to the window. A weave photographs one way and behaves another, so we do not ask you to choose from a screen.

Designing since 1991 · Own factory since 2000 · Exporting internationally · No obligation, no deposit
Inside a custom sofa

Frame, foam and fabric: what goes in

A sofa is only as good as what you cannot see. Here is what goes inside ours, and how it is put together.

Foam and comfort

Our standard seat is Duroflex 40-density hard foam, with a Duroflex 32-density supersoft comfort layer and backs; you fine-tune the firmness at the studio by sitting on samples. A seat 55 to 60 cm deep suits upright sitting and a 65 to 70 cm seat suits lounging with your legs up.

How it's built

Every sofa is built on a pine frame with 18mm BWR plywood (Apollo), pocket or zigzag springs and Duroflex 40-density hard foam. Indian teak on legs, bases and arms, in walnut polish as standard; other shades on request.

Fabrics and leathers

Choose from 300+ fabrics and leathers in our material library — linen, bouclé, velvet, textured weaves and leather.

Warranty

3-year warranty on frame, springs, foam and upholstery against manufacturing defects, confirmed in writing with your order. Normal wear, misuse and sun fading are not covered.

Which cover for which sofa

See each cover on a real sofa

Samples are in our library, and these sofas show how each cover looks once it is made.

Fabrics

Woven and textured fabrics for sofas, beds and accent pieces, shown in the library as physical cuttings.

LinenOatmeal and natural tones · sofas and beds
BoucléCream and textured weaves · headboards and accent pieces
VelvetTobacco and deep tones · accent chairs and lounge pieces
Textured weavesPart of the material library · handled at the studio

Leathers

Italian corrected-grain leather for sofas, recliners and accent pieces.

Tan & camel leatherArm caps, buckle straps and accents
Deep red leatherRecliners and statement pieces
Corrected leatherEven grain · easy to keep

Timbers

Indian teak on legs, bases and arms, in walnut polish as standard; other shades on request.

Indian teakLegs, bases and arms

Finishes

Timber finish and hardware are set as physical samples before production, matched to the room the piece is going into.

Timber and metal finishesWalnut and other polish shades, lacquer, powder-coat and gold, bronze or gunmetal PVD
HardwareChosen as samples with the finish
Stone topsSintered stone, Italian marble, onyx, Pandora quartzite

Specification

What goes inside a Mavensoft Furniture sofa.

This is the standard build. Whatever you choose at the studio is written into your order by name and code, and kept on file, so a repeat piece two years later matches the first.

Frame First-grade seasoned pine with 18mm BWR plywood (Apollo)Dry-assembled and checked before upholstery begins.
Visible timber Indian teak on legs, bases and armsWalnut polish as standard. Other shades chosen from samples at the studio.
Seat support Pocket springs or zigzag springsChosen to suit the seat depth and how the sofa will be used.
Seat foam Duroflex 40-density hard foam
Comfort layer and backs Duroflex 32-density supersoft foam
Fabric Warwick, Sarom and Davis40,000 to 100,000 Martindale rubs.
Leather Italian corrected-grain leather from MarvinEven grain that wipes clean and holds its colour.
Stone tops 18mm to 25mmItalian marble, onyx, Pandora quartzite and sintered stone.
Warranty 3 years on frame, springs, foam and upholstery against manufacturing defectsConfirmed in writing with your order. Normal wear, misuse and sun fading are not covered.

Why two foams

The 40-density base carries your weight and stops the seat sinking over the years. The 32-density layer above it is where the softness comes from.

Why BWR plywood

BWR is boiling-water resistant, an exterior grade. A humid monsoon does not loosen or swell the frame.

Why teak

Indian teak is naturally oily and resists termites, which matters in Hyderabad. The polish sets the colour; the teak does the work.

Every material on this page is in the library at our Gachibowli studio. Handle it there before you decide.

Ask us anything

Not sure which cover suits your room?

Send a photo of the room. We will talk it through, then you can handle the samples in Gachibowli.

Questions

Questions about sofa frames, foam and fabric

What is inside a custom sofa?

A pine and plywood frame, built and dry-assembled before anything is upholstered; the seat and back cushioning; and a cover of fabric or leather stretched and stapled by hand. Indian teak on legs, bases and arms, in walnut polish as standard; other shades on request.

Can I choose how firm the seat is?

Yes. Our standard seat is Duroflex 40-density hard foam, with a Duroflex 32-density supersoft comfort layer and backs; you fine-tune the firmness at the studio by sitting on samples. A seat 55 to 60 cm deep suits upright sitting and a 65 to 70 cm seat suits lounging with your legs up.

Which is better, leather or fabric?

Leather wipes clean and wears well, a good choice for families with children. Fabric such as velvet, bouclé or linen is softer, and linen is cool in a Hyderabad summer. You can handle both in our material library.

Which fabrics do you offer?

Linen, bouclé, velvet and textured weaves, plus Italian corrected-grain leather. Over 300 fabrics and leathers are in the material library. The samples are in the library at our Gachibowli studio, and the ones on this page show how they look on real sofas.

Is my choice written down?

Yes. Whatever you choose in the library is written into your specification by name and code, and that is what arrives. We keep every specification on file, so a repeat piece two years later matches the first.

Designed with you. Made by us.

See and feel the materials in Gachibowli.

No obligation. No deposit. Bring photographs of your space.

Chat on WhatsApp